diff --git a/docs/superpowers/specs/2026-07-30-local-g2-path-presmoothing-design.md b/docs/superpowers/specs/2026-07-30-local-g2-path-presmoothing-design.md
index aa125fb..6814e01 100644
--- a/docs/superpowers/specs/2026-07-30-local-g2-path-presmoothing-design.md
+++ b/docs/superpowers/specs/2026-07-30-local-g2-path-presmoothing-design.md
@@ -225,7 +225,7 @@ r''(u_endpoint) = λ² κ_geometric N
 
 ### 9.3 单个曲率事件
 
-窗口外端点从稳定的原始圆弧读取位置、切线和曲率。原运动基元边界的位置和航向作为内部锚点，跳变两侧的两个曲率值替换为一个共享的内部目标曲率。
+窗口外端点从稳定的原始圆弧读取位置、切线和曲率。原运动基元边界的航向作为内部硬边界值；其位置默认作为内部锚点，但允许按 `2026-07-31-local-g2-soft-anchor-candidate-recovery-design.md` 在配置偏移范围内沿运动法向生成有限软位置锚点候选。跳变两侧的两个曲率值替换为一个共享的内部目标曲率。
 
 内部目标曲率首先按照事件左右可用长度做距离加权插值：
 
@@ -245,7 +245,7 @@ r''(u_endpoint) = λ² κ_geometric N
 当窗口重叠时：
 
 - 合并为一个联合区域。
-- 保留各运动基元边界的位置和航向作为内部锚点。
+- 保留各运动基元边界的航向；位置按软锚点恢复设计生成有限、同配置的内部位置候选。
 - 每个内部锚点只允许一个共享曲率值。
 - 相邻五次 Hermite 片段共享位置、一阶导数和二阶导数。
 - 内部共享曲率和导数尺度通过有限、确定性的候选组合选取。
diff --git a/docs/superpowers/specs/2026-07-31-local-g2-soft-anchor-candidate-recovery-design.md b/docs/superpowers/specs/2026-07-31-local-g2-soft-anchor-candidate-recovery-design.md
index e434081..4008cc0 100644
--- a/docs/superpowers/specs/2026-07-31-local-g2-soft-anchor-candidate-recovery-design.md
+++ b/docs/superpowers/specs/2026-07-31-local-g2-soft-anchor-candidate-recovery-design.md
@@ -26,9 +26,34 @@ Three alternatives were considered:
    family.
 3. Keep all outer window boundary states exact while treating each internal
    primitive boundary as a bounded, deterministic soft anchor. Chosen: it
-   expands geometry freedom only inside the existing `0.10 m` deviation budget;
+   expands geometry freedom only inside the configured deviation budget;
    every candidate still passes the unchanged evaluator before publication.
 
+This document explicitly overrides the internal-anchor position rule in
+sections 9.3 and 9.4 of the main Local G2 design.  Path start, path end, gear
+switches, and outer window endpoints remain hard position anchors.  An internal
+primitive boundary becomes a soft **position** anchor only; its vehicle heading
+and distance-weighted shared curvature remain hard boundary values for a given
+candidate.  No other main-design contract is relaxed.
+
+## Feasibility gate before production
+
+The fixed-anchor sweep does not prove that any particular soft-anchor offset is
+feasible.  Before changing `LocalG2CandidateBuilder`, a temporary test-only
+probe must construct the exact soft-anchor profiles defined below for the real
+`SingleTurn` fixture and evaluate them with the unchanged
+`LocalG2CandidateEvaluator`.
+
+The probe records, for every attempted tuple, the window, signed offset,
+derivative multiplier, rejection reason, maximum vehicle curvature, raw and
+candidate curvature range, peak `|dκ/ds|`, variation cost, maximum deviation,
+and minimum clearance.  It is removed after the evidence is recorded.
+
+The feasibility gate passes only if at least one non-zero-offset tuple satisfies
+all existing gates, including 20 percent peak-gradient improvement.  If it does
+not pass, production builder work stops and this design must be revised; fixture
+expectations and evaluator thresholds are not changed to force GREEN.
+
 ## Candidate construction
 
 For each `LocalG2SmoothingRegion`, the outer window endpoints remain exact
@@ -48,23 +73,75 @@ internal anchors in a combined region, so adjacent quintic pieces still share
 one position, heading, derivative scale, and curvature at each anchor and
 therefore remain G2.
 
-The finite profile order for every legal window is:
+The finite profile order for every selected representative window is:
 
-1. `offset = 0.00 m`, derivative multiplier `1.00` (exact-anchor baseline);
-2. `offset = +0.05 m`, derivative multiplier `0.85`;
-3. `offset = -0.05 m`, derivative multiplier `1.15`.
+1. `offset = 0`, derivative multiplier `1.00` (exact-anchor baseline);
+2. `offset = +softOffset`, derivative multiplier `1.00`;
+3. `offset = -softOffset`, derivative multiplier `1.00`.
+
+The offset is configuration-aware:
+
+```text
+softOffset = min(0.05 m, 0.5 × MaximumDeviationMeters)
+```
+
+If `softOffset <= 1e-10 m`, only the exact-anchor baseline is emitted.  Offset
+and derivative scale are not coupled in this recovery: the feasibility result
+must isolate whether position freedom itself fixes the geometric limitation.
+The existing `0.85` and `1.15` derivative profiles are not silently combined
+with soft offsets; adding them later requires separate evidence and another
+bounded design update.
 
 The signed offsets are intentionally both present; vehicle turn sign and map
 orientation must not choose a preferred side.  A two-node, one-piece region has
-no internal anchor and therefore emits only the exact-anchor baseline.  The
-existing global `MaximumCandidatesPerRegion` cap remains authoritative; profile
-enumeration is deterministic and stops at that cap.  No configuration value is
-added in this recovery step.
+no internal anchor and therefore emits only the exact-anchor baseline.  No
+configuration value is added in this recovery step.
 
-The 0.05 m profile displacement is only a candidate-construction bound, not an
-acceptance relaxation.  The unchanged evaluator must still prove the complete
-candidate's maximum deviation is at most the configured 0.10 m, as well as all
-curvature, collision, clearance, finite-value, direction, and quality gates.
+`softOffset` is only a candidate-construction bound, not an acceptance
+relaxation.  The unchanged evaluator must still prove the complete candidate's
+maximum deviation is at most the request's configured
+`MaximumDeviationMeters`, as well as all curvature, collision, clearance,
+finite-value, direction, and quality gates.
+
+## Candidate-budget scheduling
+
+`MaximumCandidatesPerRegion` limits emitted geometries, not window variants.
+The window planner and builder must not exhaust the budget on asymmetric splits
+or three profiles for the first few targets.
+
+The window planner exposes total-length targets in deterministic coverage
+passes.  Distinct, legal target lengths are ordered as preferred, minimum,
+maximum, 0.75 × preferred, and 1.25 × preferred.  The first pass attempts the
+balanced split for every target, the second pass attempts 40/60, and the third
+pass attempts 60/40.  Each pass stops at the existing window-variant cap.  Thus
+the default limit of 12 exposes preferred, minimum, and maximum total-length
+windows before optional asymmetric variants can consume the budget.  With a
+configured limit below three, only the earliest target lengths are guaranteed;
+the result remains deterministic and within the user's requested cap.
+
+From the variants actually exposed by the planner, the builder selects at most
+four distinct representative windows in this fixed order:
+
+1. the planner's first window (preferred planner order);
+2. the legal window with minimum total length;
+3. the legal window with maximum total length;
+4. the legal window with greatest left/right asymmetry.
+
+Ties use `LocalG2WindowVariant.CandidateIndex`; duplicate window references are
+removed.  If fewer than four representatives exist, all distinct
+representatives are used.  If the candidate limit is below the required count,
+enumeration is profile-major and window-stable:
+
+1. emit the exact-anchor baseline once for each representative window;
+2. emit `+softOffset` once for each representative window;
+3. emit `-softOffset` once for each representative window;
+4. stop immediately when the configured limit (capped by the existing hard
+   maximum of 12) is reached.
+
+This guarantees baseline coverage before optional soft profiles and prevents a
+single window from consuming the complete budget.  Invalid or duplicate
+geometries do not alter the deterministic attempt order; candidate indices are
+assigned densely to successfully emitted geometries.
 
 ## Publication and failure behavior
 
@@ -82,24 +159,44 @@ regression to assert all of the following against actual preprocessor, detector,
 window planner, builder, and evaluator instances:
 
 - the exact-anchor baseline remains present and deterministic;
-- at least one emitted candidate is accepted by the unchanged evaluator;
-- the accepted candidate stays within the configured 0.10 m deviation limit,
+- the feasibility probe finds at least one accepted non-zero-offset tuple before
+  production code changes;
+- after implementation, a non-zero-offset builder candidate is emitted and at
+  least one such candidate is accepted by the unchanged evaluator;
+- the accepted candidate stays within the configured `MaximumDeviationMeters`,
   original curvature range, vehicle curvature limit, collision/clearance gates,
   and 20 percent peak-gradient-improvement gate;
+- the outer window endpoint positions, headings, and curvatures remain exact;
+- every moved internal anchor retains its original heading and shared curvature,
+  and both adjacent pieces meet it with one shared position/tangent/curvature;
+- with the default candidate cap, representative-window selection includes the
+  preferred, minimum, maximum, and most-asymmetric legal windows when they are
+  distinct;
+- limits from `1` through `12` never emit more candidates than configured and
+  preserve the documented profile-major order;
+- a configuration with `MaximumDeviationMeters < 0.10 m` scales `softOffset`
+  and never constructs an anchor outside half of that configured budget;
 - the same request produces the same candidate sequence and selected result on
   two runs;
-- forward and reverse source/heading conventions remain unchanged.
+- forward and reverse source/heading conventions remain unchanged;
+- a combined multi-event region remains internally G2 and does not exceed the
+  candidate budget when the same signed profile is applied to all soft anchors.
 
-The test must be observed failing before production changes, then pass after the
-smallest builder-only implementation.  Task 8 service integration must then
+The permanent regression must be observed failing before production changes,
+then pass after the smallest planner-and-builder implementation.  Task 8
+service integration must then
 restore `SingleTurn -> Complete` and continue to prove cancellation, rollback,
 two-region work order, report order, and legacy-method isolation.
 
 ## Scope
 
-Production change is limited to `LocalG2CandidateBuilder.cs`; the focused
-candidate verifier and existing Task 8 integration/service files may change for
-TDD and end-to-end coverage.  The previously authorized evaluator boundary
-de-duplication remains part of this Task 8 recovery.  No safety threshold,
-validator tolerance, window length, vehicle model, comparison-default method,
-or collision/clearance behavior changes.
+Production changes are limited to `LocalG2WindowPlanner.cs` and
+`LocalG2CandidateBuilder.cs`; the focused detection/candidate verifiers and
+existing Task 8 integration/service files may change for TDD and end-to-end
+coverage.  The previously authorized evaluator boundary de-duplication remains
+part of this Task 8 recovery.  No safety threshold, validator tolerance, window
+length, vehicle model, comparison-default method, or collision/clearance
+behavior changes.  The main Local G2 design is amended only to reclassify
+internal primitive-boundary positions as bounded soft anchors and to guarantee
+representative target coverage before asymmetric window variants; all other
+hard-anchor and safety contracts remain unchanged.