TrajectoryObservationMovementTest is an observe-only host for the real MDCS localization and chassis-speed read interfaces. It bootstraps the coarse path and Local G2 reference once, repeatedly plans EM trajectories, samples the latest published trajectory, and draws the world, L-S, and T-S/T-V layers. It does not drive, steer, brake, change gear, or invoke a geometric vehicle controller.

Every runtime status contains OBSERVE_ONLY: no chassis command is sent. Treat the displayed control command as a diagnostic prediction only. Goal and rolling-safety-stop commands are logged, never applied to hardware. At the end of a gear-switch trajectory, the observer remains on direction segment 0 and waits for real direction confirmation; it does not create or dispatch a direction-change action.

Configuration

Field	Unit	Default	Meaning
`GoalXmm`	world mm	`NaN`	Goal X. If X or Y is not finite, the host prompts for X, Y, and yaw.
`GoalYmm`	world mm	`NaN`	Goal Y.
`GoalYawDeg`	world deg	`0`	Goal heading.
`MapPaddingMeters`	m	`2.0`	Padding added on all sides of the start/goal bounds.
`MapResolutionMm`	mm	`50`	Local occupancy-grid resolution.
`ReplanPeriodSeconds`	s	`0.20`	Minimum interval between EM planning cycles.
`ObserverPeriodSeconds`	s	`0.05`	Live-state sampling and redraw interval.

The planning snapshot also uses the setup defaults: vehicle length 0.80 m, vehicle width 0.60 m, safety margin 0.05 m, and maximum curvature 1 / 1.20 m (about 0.8333 1/m). All fields and manual obstacles are read and frozen before the background session starts. The live pose and actual longitudinal speed are then read once per observer tick.

Manual obstacles

Enter a count from 0 through 20, then select each obstacle type. Coordinates are global/world millimeters.

Circle example: center (2500, 1200) mm, radius 300 mm.
Axis-aligned rectangle example: center (4000, -500) mm, X length 800 mm, Y width 500 mm.

The complete obstacle envelope must fit inside the start/goal bounds plus MapPaddingMeters; otherwise bootstrap is rejected before EM planning.

Reading the layers

TrajectoryObserver.World shows map bounds and occupied cells, the frozen start and goal, Hybrid A* coarse path, Local G2 smoothed path, current real pose, and latest published EM trajectory.
TrajectoryObserver.LS plots reference path-S horizontally and lateral offset vertically. Projection failures indicate trajectory points that could not be associated with the current direction segment.
TrajectoryObserver.ST overlays time-to-path-S and time-to-signed-speed. Use it to check monotonic time/progress, stop profiles, and the sign of forward/reverse velocity.

EmTrajectoryPoint.VelocityX and VelocityY are world-frame components. They are not chassis-frame velocity commands and must never be forwarded directly to a vehicle motion interface. This MovementTest performs no coordinate conversion for driving and has no driving capability; any future execution mode requires a separate safety-reviewed design.